|
Mounting Arrangement
Set of engine and alternator coupled directly by means of a flexible
disk and mounted on a reinforced steel base frame without fuel tank and
with anti vibration mountings which ensures a vibration free standing of
the generating set. The assembly is made according to EEC regulations. On
the open set version the industrial type silencer is included and shipped
separately.
Deutz Engine
Four stroke, direct injection, air cooled Diesel engine of the 912
series, known world-wide as “universal” engines. Deutz has sold more
than 2,5 million units all over the world. This makes this type of engine
appropriate for generating set use due to its reduced dimensions. Its easy
maintenance and longevity together with the compliance of their exhaust
emissions to the prevailing regulations, makes the engine the best choice
for producing clean energy. Engines include EPA standards plate. Stop
solenoid included.
Engine power: Emergency power according to ISO 3046 (IFN3) at variable
load measured at 300 m a.s.l. and 25ºC ambient temperature.
Alternator
Stamford, brushless, self-excited, self regulated with electronic
voltage regulation (AVR), four poles, IP 23 protection for PAD 30 M USA and
PAD 30 USA models and IP 22 for the rest. Class H insulation.
Control Panel
equipped with:
AMT-910 control unit for control and protection of the generating set which
includes:
- The condition of the generating set, measurements, alarm messages, etc
are shown on the LCD display. All messages can be deleted with the reset
button.
- Measurements
- Generator Frequency
- Voltage and Amperes
- Working Hour-Meter
- Battery Voltage
- Alarms:
- Low Oil Pressure
- High Engine Temperature
- Low Fuel Level
- Belt Failure
- Over-Speed
- Generator Voltage Out of Margin
- Over-Current of the Generator
- Frequency Out of Margin
- Start Failure
- Adjusting Parameters:
- Several parameters are programmable
- For more information refer to the operation manual
- Functioning Mode:
- Automatic
- Manual
- Test
- Program
- Reset
- Disconnected
|