Gen Set Model: BCJD44S / Engine Model: 4039DF

BCJD44S Generator John Deere Diesel

Newage International

Click Here for Standard Specifications

Product Reference Specifications
Rating: Prime Power  All ratings are suitable for continuous electrical power (at variable load in lieu of main power network). There is no limitation to the annual hours of operation and all models can supply 10% overload power for 1 hour in 12 hours.
Standby Power BCJD44S. Standby ratings are for the supply of emergency power at variable load in the event of a main power network failure up to a maximum of 500 hours per year. No overload is permitted. Output ratings are typical for sets operating at 380-415 Volts. For other Voltages see price list.
Genset Model Engine Type 50Hz 50Hz 60Hz 60Hz Weight Net Dim Dim Dim
    kVA kW kVA kW kg L W H
BCJD44S 4039DF 44.0 35.2 52.0 41.6 830 2075 650 1410
Model Ref Engine KVA KW EPA Price Ex Miami   EX Factory  
  Model     Engine Open Canopy Open Canopy
BCJD44S 4039DF 52 41.5   $11959.54 $15231.87 $11343.44 $14362.18
T   E    C   H   N    I   C    A   L         D     A    T     A
Engine Model :
4039DF
Number of Cylinders:
4 In line
Cubic Capacity: Lts (cu.in)
3.9 (239)
Bore/Stroke : mm (in)
106 x 110 (4.19 x 4.33)
Compression Ratio :
17.8 : 1
Aspiration :
Natural
Frequency :
50 Hz
60 Hz
Engine Speed :
1500 r/min
1800 r/min
Maximum Continuous/ Prime Power at Flywheel : kW (hp)
35 (47)
41.5 (56)
BMEP : kPa (psi) Prime
730 (106)
737 (107)
Piston Speed : m/sec (ft/sec)
5.5 (18.05)
6.6 (21.65)
Fuel Tank Capacity:Lts(UK Gal)
150 (33)
150 (33)
 
1500 r/min
1800 r/min
Fuel Consumption BCJD44S: l/hr
10.59
12.47
Heat Rejection to Exhaust System: kW (Btu/min)
32.5 (1849)
38.0 (2162)
Heat Rejection to Cooling System: kW (Btu/min)
22 (1250)
25 (1430)
Total Radiated Heat: kW (Btu/min)
5.0 (285)
6.0 (341)
Exhaust Temperature:°C (°F) Prime
540 (1004)
560 (1040)
Cooling Air Flow : m3/min (cfm)
126 (4450)
141 (4979)
Combustion Air Flow: m3/min (cfm)
2.4 (85)
3.0 (107)
Exhaust Gas Flow : m3/min (cfm)
6.7 (237)
8.4 (300)

 

Note: Standard reference conditions 0.8 p.f. 25°C (77°F) ambient, 177m (600 ft) Altitude and 40°C (104°F) Fuel Inlet Temperature. All engine performance data based on the above mentioned maximum prime ratings. Fuel consumption data at full load (100%) with diesel fuel with a specific gravity of 0.85 and conforming to BS2869:1988, Class A2.