Mobile Generator Sets
 Custom
built trailers are vehicles specially designed and built
for transporting Taylor Power Systems generator sets
with maximum safety at highway speeds. These mobile
generators from 20 to 100 kw are powered by Perkins
mobile EPA certified engines. These are complete ready
to run generator sets with DOT rated integral tank
trailers. Standard equipment includes a heavy-duty
weather enclosure with hinged doors, critical grade
exhaust silencer, battery, oil, anti-freeze, and full
output circuit breaker. The standard analog control
panel provides full instrumentation with voltmeter,
frequency meter, percent of load meter, oil pressure
gauge, hour meter, coolant temperature gauge, fuel level
gauge, and battery voltmeter. The controller also
provides a safety shutdown system.
 All
trailers come equipped with a fuel tank built into the
trailer, electric brakes with safety disconnect and 7
wire connector, torsion axle(s), front tongue jack, two
rear stabilizer jacks, ICC lighting, and license plate
bracket. These trailers also come with a lockable
storage trunk at the front of the trailer.
|
TM20 |
20 |
Perkins 404C-22G |
BCI184E |
75 |
3500 lb. |
|
TM30 |
30 |
Perkins 1103C-33G1 |
BCI184G |
75 |
3500 lb. |
|
TM45 |
45 |
Perkins 1104C-44G2 |
UCI224C |
75 |
5000 lb. |
|
TM60 |
60 |
Perkins 1104C-44TG1 |
UCI224E |
75 |
5000 lb. |
|
TM80 |
80 |
Perkins 1104C-44TAG1 |
UCI274C |
150 |
7000 lb. |
|
TM100 |
100 |
Perkins 1104C-44TAG2 |
UCI274C |
150 |
7000 lb. |
Optional Equipment:
- Sound Attenuated Enclosure
- Multi-Voltage Selector Switch
- Dual Voltage Generator
- Output Power Cable
- Block Heater
- Battery Charger
- PMG Exciter (not available on the TM20)
- Isochronous Governor TM30 through TM60
Note: Isochronous Governor is standard on the TM80
and TM100 (not available on the TM20)
|
