Generator: ON
Engine: ON
Parts: ON
Service: ON
Other: ON
Name: Curtis Lusk
Phone: 661-399-1740
Email: games@paladingaming.com
B1: Submit
Date: 07/25/2006
Time: 02:40 PM
This is a test of this form
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Michael Stoneburner
Phone: 810-748-9112
Email: kbeattie@i-is.com
B1: Submit
Date: 07/31/2006
Time: 09:00 AM
Our home is 1,100 sq. ft. We have a Reliance Gen Switch 30Amp/120V Transfer Switch installed in our homw hen it was built 3 1/2 yrs. ago. we are looking for a generator (deisel/electric start) that will power up most of our home. We have central air/gas heat, electric stove, dryer. Our heat is gas forced air. Our water heater is gas also. Please send us information or call us this evening with the information. Shipping, payment terms and warranty along with product informatiom. We have a friend at work who has ordered a generator from you. His name is Don Kuplerski. The only thing he was unhappy about was the time frame it took to recieve it. Again, please call us with information as soon as possibel. We live on an island and have lost our power 4 times in the past six weeks for at least 12 hrs. There have been times we have been without power for at least 3 days.
Generator: ON
Engine:
Parts:
Service:
Other: ON
Name: Michael Catalan
Phone:
Email: Michael.Catalan@pnl.gov
B1: Submit
Date: 08/02/2006
Time: 04:22 PM
I need to come up with a small power solution for remote locations within California. I need either a generator to power equiptment that draws less than 5kW for at least 72 hours. It must be acceptable for at least 72 hours of continuous operation in CA. Thanks, --Michael Catalan Pacific Northwest National Laboratory
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Joe Spradlin
Phone: 850-883-7054
Email: spradlij@eglin.af.mil
B1: Submit
Date: 08/08/2006
Time: 03:57 PM
Looking for stand-alone generator unit, 125K, 480V Prices on Diesel and Gas if available.
Generator: ON
Engine:
Parts:
Service:
Other:
Name: musa gidado
Phone: 07900192137
Email: mjsagidado@hotmail.com
B1: Submit
Date: 08/20/2006
Time: 01:32 PM
used lister generators
Generator: ON
Engine:
Parts:
Service:
Other:
Name: musa Gidado
Phone: 07900192137
Email: musagidado@hotmail.com
B1: Submit
Date: 08/20/2006
Time: 01:34 PM
used lister generators
Generator: ON
Engine:
Parts:
Service:
Other:
Name: musa Gidado
Phone: 07900192137
Email: musagidado@hotmail.com
B1: Submit
Date: 08/20/2006
Time: 01:34 PM
used lister generators
Generator: ON
Engine:
Parts:
Service:
Other:
Name: musa Gidado
Phone: 07900192137
Email: musagidado@hotmail.com
B1: Submit
Date: 08/20/2006
Time: 01:35 PM
used lister generators
Generator: ON
Engine: ON
Parts: ON
Service:
Other: ON
Name: Gajendra Singh
Phone: 91-9828386223
Email: intl@atoz.co.in
B1: Submit
Date: 08/21/2006
Time: 01:21 AM
Dear Sir We take this opportunity to introduce ourselves as a leading manufacturer of LT Panels & Busducts and furnish here below a brief insight of our Company: KMG ATOZ SYSTEMS PVT. LTD. is a professionally managed ISO 9001 company run by the qualified & renowned technocrats having a vide exposure of executing the projects of national & international repute involving highly reputed organizations & consultants. A) The Key Technocrats We have with us the qualified & highly experienced technocrats having a proven track record of executing very reputed jobs of NTPC, EIL, BHEL, PGCIL, B.A.R.C. KONKAN railways, MNC projects like Hyundai Motors, Daewoo Motors, Samsung, New Holland tractors, Denso etc. etc. B) The Plant & Infrastructure We have with us state of art ISO 9001 certified plants having in-house facilities of Fabrication, Pretreatment, Assembly, Wiring & Testing. The plant is fully equipped with all CNC M/C’s, Seven Tank Pre-treatment System, Powder Coating plant, Test Labs and all modern facilities for carrying out all routine tests in house. C) The Project Execution Infrastructure We have a full fledged Project Execution Team & Infrastructure equipped with CAD based design facilities, Core Project Management & Site Execution Wings. We have all the modern equipments & other means & aids to execute projects of big magnitude. D) Type Tests Our panels are manufactured in line with our standard design parameters & are type tested from CPRI for Short Circuit (50 KA for 1 sec.) and Temperature Rise. Also type tested for IP55 degree of protection. E) Products List PCC’S/ PMCC’S MCC’S FIXED/ DRAW OUT-TYPE , DB’s/ FEEDER PILLARS, STARTER PANELS, PUSH BUTTON STATIONS, JB’S, CONTROL DESKS, REPLY PANELS, PLC PANLES, AMF PANELS, SOFT STARTER, AUTOMATIC POWER FACTOR CORRECTION PANELS, BUS DUCTS, BUS TRUNKINGS, RISING MAINS, TRANSFORMERS, TURNKEY EXECTUION:- SUPPLY, ERCTION, TESTING & COMMISSIONING OF SUBSTION EQUIPMETS, INTERNAL & EXTERNAL ELECTRIFICATION, CABLING & EARTHING, PUBLIC ADDRESS & TELECOMMNICATION SYSTEMS, FIRE ALRAM SYSTEMS ETC, LAN SYSTEMS, OPERATION & MAINTENANCE CONTRACTS FOR:- SUB –STATIONS, PLANT LIGHTING, ELECTRICAL UTILITIES, PUMPING STATIONS, DG SET. ENVIRONMENT FRIENDLY SOLUTIONS:- SOLUTIONS FOR NOISE, AIR & WATER POLLUTION SUCH AS ACOUSTIC ENCLOSURES FOR EXISTING DG SETS, EXTENDED EXHAUST SYSTEMS & EFFUENT TREATMENT PLANT. LIGHTING PRODUCTS CFL, BULBS, TUBE LIGHT, TOWER LIGHT, TRAFFIC LIGHT, FLED LIGHT, HALOGEN, ETC SWITCHGEAR PRODUCTS MCB, MCCB, ELCCB, RCCB, CHANGEOVER SWITCH, LT SWITCH, DP SWITCHES, STARTER, DISTRIBUTION BOX, CONTACTORS, DISCONNECTORS, HOME USED ELECTRICAL APPLIANCE CEILING FAN, STAND FAN, WALL FAN, VENTILATION FAN, EXHAUST FAN, ELECTRONIC BALLST, GAS GEYSER, ELECTRIC GEYSER, CABLES HT & LT, HEATER, HEATING ELEMENTS, PACKAGING TAPE :- INSULATTION TAPE TRANSMISSION LINE: We also supply Transmission line for power project We have sufficient resources & capabilities to fully support our products for quick deliveries of Panels, switchgears, Lighting Products, We will provide you the excellent quality of after sales service. We would like to make with you Joint Venture for developing long terms business relationship with you. Please feel free to contact me at any time Thank you Best regards Mr.G. Singh General Manager –Export/Import KMG ATOZ SYSTEMS PVT LIMITED C-49 Sector -81 Phase –II Gautam Budh Nagar Noida -201301 U.P.India Mobile No.++91-9818386223
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:27 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:28 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:28 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:28 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other:
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:29 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other:
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:29 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator:
Engine:
Parts:
Service:
Other:
Name: Chris Baker
Phone: 07732190820
Email: chris@genny.co.uk
B1: Submit
Date: 09/03/2006
Time: 11:29 AM
We are a company that specialises in developing hardware and software for the monitoring of generators. We achieve this using GPRS and SMS over GSM networks The units we have are software driven using Java code that we write for each application. The normal mode of operation for one of the units is to connect the module to an intelligent generator controller. From this we can extract all the information from the controller and forward this onto a server and then onto web pages. The server software can run on any PC with a dedicated connection to the internet. It requires a fixed IP address which most broadband supplier will give. Once the information is in the server it can be manipulated to give the display information required by the customer. With the information converted to a web format it can then be seen by any one else with internet access at work or at home and on handheld devices. The level of access for security is set by password authorization . The modules have up to 7 digital input pins , 8 digital output pins and 3 analog input pins. These can be used where a generator only has a key start type panel to get information. The units are designed to run on voltages from 9 to 30 volts so are ideal for generator applications. We have GPS as standard in some modules which will give you location information and mapping if available. The GPS modules also have an inbuilt battery so data can still be sent for several hours after a battery is disconnected in the event of theft. All the data sent from the modules to the server is captured in history files so present or previous data can be easily accessed. An example of the type of data that can be captured can be seen at http://www.genny.co.uk:2150 The modules are easy to fit requiring only a DC supply, an antenna connection and the comms lead to the controller. If the digital pins or analog pins are required then some more interfacing is required. Once the module is powered up it will automatically connect to the server and start sending data. Al that is required is for the operator to either enter the web or send an SMS to give the unit a name and location for identity purposes only. All of the data and available information can be accessed directly from the modules giving on the road engineers the same information for diagnostic purposes. As you will see from the out test web site the unit will also act as a power meter in conjunction with the right type of generator controller to give access to Kw , Kvar , Pf , Kw/hours and Kvar/hours. In todays energy saving market this competes with similar systems on fixed lines at many times our prices We can develop software to suit your exact needs if required as the base structure of our system is very flexible. The modules can carry out any function that requires getting information from a device with an RS232 connection. We have the ability to connect this to any internet enabled device as well as just SMS if required. We have worked on projects where all sorts of information was required from generators, UPS's and Temperature control equipment. We can make the unit act as a vehicle alarm complete with tracking and the ability to operate functions like door locks, electric windows etc as well as gathering fuel levels and mileage. As you can see the ability of these units is only restricted with peoples imagination. I hope this gives you most of the information required. Some more information can be seen at http://www.genny.co.uk Kind Regards Peter Peter James Chris Baker Applications Engineer Installation Engineer genny.co.uk genny.co.uk Tel: UK 0207 193 5999 Tel 01902 602285 Mob: UK 07908 803131 Mob: UK 07732190820 pete@genny.co.uk chris@genny.co.uk Web site www.genny.co.uk Remote Solutions for the Generator Industry
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Chet Guintini, Los Banos Fire Dept
Phone: 209-827-7025
Email: chet.guintini@losbanos.org
B1: Submit
Date: 09/09/2006
Time: 11:32 AM
we have an Amps hydrulic generator in our rescue vehicle. the armature is frozen, the hydrulic motor turns free, can you repair this unit. We perfer not to send it to AMPS
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Farhad Namiranian
Phone: 98-711-2288894
Email: namiranf@yahoo.com
B1: Submit
Date: 09/13/2006
Time: 05:11 PM
Hi I have a new invention named " Low tire air pressure warning device" . This device alarms for flat tire or low tire pressure to driver during driving. I have spend 10 yaers on it and considered all related matters. Now I am looking for a fair partner for mass production of it and marketing it around all of the world .I have made some kind of prototypes in these years and test and have got good results.It is unique in the world (I have search in this matter and know all other types). It can be install on ALL kinds of trucks , buses and traillers . I have considered vibrations,mud,thief,min and max temperature operation,safety matters,no fulse alarm,compatible price,light weight,usable on with tube tires and tubeless tires,real practical matters to installing and using it,, and so on. Some researches say bilions of dollar tire loses annual because of flat or low pressure tires.Also it causes some accidents in roads because explotion of the tire of beside the flat tire in 6 wheel vehicles.Heat of flat tire and caused flame is dangerous for trucks transport explosive materials. There are various types of such device for cars , but for trucks and buses and traillers mine is the best and unique. If you are interesting to investment and cooperation on this matter email me. I have search some related electronic companies ready to accept mass production of it,but I have not investment abilities,also I am alone yet. I need your investment and commercial supports. regards, Farhad Namiranian namiranf@yahoo.com
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Farhad Namiranian
Phone: 98-711-2288894
Email: namiranf@yahoo.com
B1: Submit
Date: 09/13/2006
Time: 05:13 PM
Hi I have a new invention named " Low tire air pressure warning device" . This device alarms for flat tire or low tire pressure to driver during driving. I have spend 10 yaers on it and considered all related matters. Now I am looking for a fair partner for mass production of it and marketing it around all of the world .I have made some kind of prototypes in these years and test and have got good results.It is unique in the world (I have search in this matter and know all other types). It can be install on ALL kinds of trucks , buses and traillers . I have considered vibrations,mud,thief,min and max temperature operation,safety matters,no fulse alarm,compatible price,light weight,usable on with tube tires and tubeless tires,real practical matters to installing and using it,, and so on. Some researches say bilions of dollar tire loses annual because of flat or low pressure tires.Also it causes some accidents in roads because explotion of the tire of beside the flat tire in 6 wheel vehicles.Heat of flat tire and caused flame is dangerous for trucks transport explosive materials. There are various types of such device for cars , but for trucks and buses and traillers mine is the best and unique. If you are interesting to investment and cooperation on this matter email me. I have search some related electronic companies ready to accept mass production of it,but I have not investment abilities,also I am alone yet. I need your investment and commercial supports. regards, Farhad Namiranian namiranf@yahoo.com
Generator:
Engine: ON
Parts: ON
Service:
Other:
Name: Garo A. Akopians
Phone: 982188730007
Email: garich_hakopian@yahoo.com
B1: Submit
Date: 09/23/2006
Time: 02:03 AM
we need to purchase followings primerily: 1-DUETZ engine model F6L912 10units Spares for above engine: 1-Piston(0150-07) 500 sets 2-Camshaft(0150-10) 50pcs 3-Valve machines(0150-11) 500sets 4-Lube oil pump(0150-14) 500 sets 5-Injector(0150-19) 500sets 6-Connecting rod(0150-06) 500sets Would you please inform us of your best prices and the terms of delivery. Payment will be performed through a at sight L/C and delivery should be CFR Bandar abbas port of Iran. Best regards G.A.Akopians Buisiness affair
Generator:
Engine: ON
Parts: ON
Service:
Other:
Name: Garo A. Akopians
Phone: 982188730007
Email: garick_hakopian@yahoo.com
B1: Submit
Date: 09/23/2006
Time: 02:06 AM
we need to purchase followings primerily: 1-DUETZ engine model F6L912 10units Spares for above engine: 1-Piston(0150-07) 500 sets 2-Camshaft(0150-10) 50pcs 3-Valve machines(0150-11) 500sets 4-Lube oil pump(0150-14) 500 sets 5-Injector(0150-19) 500sets 6-Connecting rod(0150-06) 500sets Would you please inform us of your best prices and the terms of delivery. Payment will be performed through a at sight L/C and delivery should be CFR Bandar abbas port of Iran. Best regards G.A.Akopians Buisiness affair
Generator:
Engine:
Parts: ON
Service:
Other:
Name: Raman Garg
Phone:
Email: ramangarg@rediffmail.com
B1: Submit
Date: 09/26/2006
Time: 02:09 AM
Requested Sir/Madam, We are one of the leading manufacturer & Trader of Fuel Injections for Lister and Petter Engines. Please visit our site www.bthiclass.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Balaji
Phone: 9313090443
Email: balajisitarammishra@indiatimes.com
B1: Submit
Date: 09/27/2006
Time: 03:33 AM
want your contact no.
Generator:
Engine:
Parts: ON
Service:
Other:
Name: melissa foy
Phone: 6026637074
Email: missy02662000@yahoo.com
B1: Submit
Date: 10/05/2006
Time: 07:41 PM
parts for a vm hr392a need two push rods rocker arm part# 2041019 and rocker arm 2041018 also stamped fuginiand a manual and a rocker arm shaft
Generator: ON
Engine: ON
Parts:
Service:
Other:
Name: Craig Allenby
Phone: 97148872828
Email: c.a@desco-intl.com
B1: Submit
Date: 10/17/2006
Time: 07:50 AM
Dear Sir, We are currently working on possibility for a job where we will require to employ two units of Caterpillar generator on a client's rig site. Units of interest will the be out of stock and ready for immediate shipments. 02 COMPLETE NEW SKID MOUNTED UNITS CATERPILLAR 3412 750KVA 50/60HZ 380-415VOLTS 3 PHASE TURBO CHARGED WATER COOLED ENGINE COMPLETE WITH SOUND PROOF ENCLOSURE READY TO HOOK UP OPTIONAL: We would also like to have an option of consumable spares for a period of one year continous use of above generators PRICE Basis ex work & C&F Dubai. Your offer must clearly confirm complete description such as make model engine + generator specs etc. Your offer is to be supported with cut sheet/technical data sheet. Your offer must state firm deliveries. Craig Allenby For DESCO ME. E,mail: c.a@desco-intl.com For DESCO M.E Ops. Unit 001, LOB10, P.O.Box 17487, Jebel Ali Free Zone. Jebel Ali UAE Tel: + 971 4 88 72 828 Fax: + 971 4 88 72 829
Generator:
Engine:
Parts:
Service:
Other:
Name: mike collins
Phone:
Email: corporatefinance2000@yahoo.com
B1: Submit
Date: 10/27/2006
Time: 05:44 AM
Dear sir/ma My humble organisation need to purchase from you please, we need to purchase your cummins generator part. with model number top kit 3037359 or speed cont 3044196, ring set 3801056 and 4089500 actuator 3408326 main brg 4911903 gasket 380731 Which ever one that you have instock among the listed just quote me.please give to us the price quote, so that we give to you the quanity that we require. Please this order has to be deliver to united state of america. as soon as you get back to us with the quote also with the shipping cost to My destination here in Georgia we shall forward to you our credit card details to process for payment. Please get back to us as soon as possible so that we both move forward in this matte your anticipated response is awaited. david mark
Generator:
Engine:
Parts:
Service:
Other:
Name: Chief Angwafor S. Fru.
Phone: 2375980000
Email: angwafor_fr@yahoo.com
B1: Submit
Date: 11/05/2006
Time: 12:02 PM
Attn Sir/Madam, My name is Chief Angwafor S. Fru, I am the vice Chairman of the Cameroon People's Democratic Movement (CPDM) the ruling Party of the Republic of Cameroon. I learned that your company is into generator manufacturing/supplying business, I want to know if your company can handle a contract supply of good number of generators to the CPDM Party of Cameroon, if your esteem company can handle this order, let me know the quality/specification of the product you can supply and also the price. Due to the nature of this contract, I will like to treat with theDIRECTOR of this company to enable us quickly finalize in the arrangement as the time for the supply is at hand. Regards, Chief Angwafor S. Fru. Flat B Evidence Building, City Chemist Round-about B.P 114 Bamenda, North West Province Rep, of Cameroon. Telephone:+237 598 00 00 E-mail: angwafor_fr@yahoo.com
Generator:
Engine:
Parts:
Service:
Other:
Name: Chief Angwafor S. Fru.
Phone: 2375980000
Email: angwafor_fr@yahoo.com
B1: Submit
Date: 11/05/2006
Time: 12:02 PM
Attn Sir/Madam, My name is Chief Angwafor S. Fru, I am the vice Chairman of the Cameroon People's Democratic Movement (CPDM) the ruling Party of the Republic of Cameroon. I learned that your company is into generator manufacturing/supplying business, I want to know if your company can handle a contract supply of good number of generators to the CPDM Party of Cameroon, if your esteem company can handle this order, let me know the quality/specification of the product you can supply and also the price. Due to the nature of this contract, I will like to treat with theDIRECTOR of this company to enable us quickly finalize in the arrangement as the time for the supply is at hand. Regards, Chief Angwafor S. Fru. Flat B Evidence Building, City Chemist Round-about B.P 114 Bamenda, North West Province Rep, of Cameroon. Telephone:+237 598 00 00 E-mail: angwafor_fr@yahoo.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Chief Angwafor S. Fru.
Phone: 2375980000
Email: angwafor_fr@yahoo.com
B1: Submit
Date: 11/05/2006
Time: 12:03 PM
Attn Sir/Madam, My name is Chief Angwafor S. Fru, I am the vice Chairman of the Cameroon People's Democratic Movement (CPDM) the ruling Party of the Republic of Cameroon. I learned that your company is into generator manufacturing/supplying business, I want to know if your company can handle a contract supply of good number of generators to the CPDM Party of Cameroon, if your esteem company can handle this order, let me know the quality/specification of the product you can supply and also the price. Due to the nature of this contract, I will like to treat with theDIRECTOR of this company to enable us quickly finalize in the arrangement as the time for the supply is at hand. Regards, Chief Angwafor S. Fru. Flat B Evidence Building, City Chemist Round-about B.P 114 Bamenda, North West Province Rep, of Cameroon. Telephone:+237 598 00 00 E-mail: angwafor_fr@yahoo.com
Generator:
Engine:
Parts:
Service:
Other: ON
Name: xiang
Phone: 00865765135378
Email: bonner@lightsets.com
B1: Submit
Date: 11/06/2006
Time: 12:25 AM
Estimado sir: Somos el manufactory de la profesión para los interruptores de presión para la bomba de agua. Nuestra fábrica está situada en Taizhou, Zhejiang, China. Nuestra calidad es excelente, y el precio es muy competitivo. Aquí está nuestro regulador automático NUEVO de la bomba que cambia una bomba por intervalos según demanda. Una solución económica al requisito para el control automático de una bomba de agua eléctrica según demanda. Detectando amba el flujo y ejerce presión sobre la PRENSA que EL SISTEMA puede activar automáticamente la bomba el usuario abre una válvula o un golpecito conectado con el enchufe de la bomba. La PRENSA FIJADA también protege la bomba automáticamente cambiando de la bomba si hay una ausencia del flujo causada por la escasez del agua o de la obstrucción al flujo de la entrada. 1. Operación automática de la bomba según demanda. 2. Montaje fácil. 3. Puede ser instalado en cualquier posición. 4. Él ningún tanque de presión de la necesidad. 5. El diseño más último. 6. Protege la bomba contra el funcionamiento seco. PRESIONAR las descripciones DETERMINADAS EPC-01: Voltaje de entrada: 230-115v 50/60Hz Corriente máxima: 10A Salida de energía máxima: 1.8kW Grado de la protección: IP65 Presión máxima del agua: 10bar Conexión: 1” Lámpara indicadora: Energía en la bomba en /Fault Ahora tenemos otras series EPC-01,02,03,04. Si estás interesado, sentirte por favor libre dejar nos saber o el email nosotros, nosotros pics del email de la voluntad y los detalles a ti. Gracias y recuerdos Bond Xiang (encargado de ventas) Xianghe Co., Ltd. Teléfono: 0086 576 5135378 Fax: 0086 576 5135238 Email: bonner@lightsets.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Delower Hossain
Phone: 88-02-8753708
Email: parentsenterprise@yahoo.com
B1: Submit
Date: 11/07/2006
Time: 02:07 AM
Dear Sir, Please be informed that Parents Enterprise is one of the renowned Business Enterprise of Bangladesh, Established in 1993. Our main business area is Defense services of Bangladesh, Specially Bangladesh Navy (BN), Bangladesh Police, Bangladesh Rifles, Bangladesh Coast Guard, Bangladesh Rapid Action Battalion (RAB), Bangladesh Army and Bangladesh Air Force (BAF). We supply security Items, Special type Tools, Search Light, Boat, RIB, Aircraft; Aircraft Engine, Spare parts of Armored Vehicles (Tank T-69, T-59, BTR-80) spare parts of Heavy Vehicles (Tank transporter), Crain, Power Trolley, Signal Light, Metal detector, Defense Educational materials, Software, Kitchen Items, House Holds, Foreign furniture, Air Condition, Food items and all types of Equipments and Ammunition needs in Bangladesh Defence. I have gone through your website and got your e-mail address. I want buy from you continually as per our Bangladesh Defence requirements basis. Please give us authorization as your product supplier. Presently Bangladesh Navy purchases: Product Name: Diesel Generator Country of origin: USA , EU, Japan , Canada AC Voltage: 220V/240V Power factor: 1.0 Continuous out put: 7.3 KVA Max out put: 8 KVA Starting System: Self (Electric system) It is for your kind information that, we may need price quotation and cataloged of product. Specification find in attachment. An early response from your end would be highly appreciated. I am waiting for your reply. Thanking you With best regards Delower Hossain Executive Officer Parents Enterprise CB-234/2, Main Road, Kachukhet Dhaka Cantt, Dhaka-1206 Bangladesh Phone:880-2-8753708 Cell: 880-191263956 Fax : 880-2-9860424
Generator:
Engine: ON
Parts:
Service:
Other:
Name: jerry
Phone: 0086-594-7280550
Email: jerry@mianxianmachinery.com
B1: Submit
Date: 11/22/2006
Time: 03:06 AM
www.mianxianmachinery.com minxianmachinery parts plant plunger nozzle ,delivery valve,cam disk, drive shaft,head rotor 0086-594-7280550 jerry@mianxianmachinery.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: bob harland
Phone:
Email: bobnred@webtv.net
B1: Submit
Date: 11/22/2006
Time: 11:40 PM
do you do installations of residential gen-sets? if so do you travel to this area...Dinuba-Visalia Thank You
Generator:
Engine:
Parts: ON
Service:
Other:
Name: Benard Watson
Phone: 915-808-8454
Email: engr_benard_watson@UnionPlus.net
B1: Submit
Date: 11/23/2006
Time: 12:38 AM
Dear Sir/Ma, I am please to contact you and to let you know that am interested to purchase the below said items, such as DETRIOT,CATERPILLER AND CUMMINS EGNGINE PARTS. Therefore i will like you to quote the price cost of this items below and let me know the availability of them in stocks :- PERKINS OEM GENUINE PARTS 1. Piston Ring Sets - part no.KRP 1251 x 20pcs 2. Turbo Charger - (part no. 2674A080) x 3pcs 3. Turbo Charger - (part no. 2674397) x 7pcs CATERPILLAR GENUINE PARTS 1u2665....14 gallon cartridge 3g2752....21 gallon cartridge ------------------------------------------------------- DETRIOT PARTS 23522955 RING SET 5190560R FUEL PUMP 5199561R FUEL PUMP 5198676................4-71 SERIES...GASKET KIT 5196380................6V-71SERIES...GASKET KI 5196381................8V-71SERIES..GASKET KIT 5199673................6V-92SERIES..GASKET KIT 23506735 WaterPump.. 5A7005 Washer.... ------------------------------------------------------- CUMMINS PARTS GASKET KIT 4025155 MAIN BEARING 4025125 CON BEARING 3047392 INJECTOR 3094292 Kindly get back to me with the availability items among the required list , also the shipping price to the address below: TABITHA VITAL 4218 BEARDEN PL LN HOUSTON,TEXAS,77082 USA. oR I shall advise and arrange the pick-up of the order myself after payment have confirmed. Payment Term : CREDIT CARD ( Visa,Master,Amex). Best Regards Engr Beanrd Watson.
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Dave Fenstemacher
Phone: 208-452-2137
Email: fenster@fmtc.com
B1: Submit
Date: 12/18/2006
Time: 01:12 PM
I would like to know if you make a generator that runs on methane gas, I am interested in starting a pellet mill business and have methane available for fuel. Do you have info.and or prices for me ? Horsepower to run mill 100 to 300hp. Thanks Dave
Generator: ON
Engine: ON
Parts: ON
Service: ON
Other: ON
Name: giridharan
Phone: 9994372622
Email: giridharanmuthukrishnan@yahoo.com
B1: Submit
Date: 12/29/2006
Time: 12:17 AM
We are planning to install a 30kw or 40 kw genset (lightweight) at the roof of our building at Chennai S India. Kindly provide the details at the earliest
Generator:
Engine: ON
Parts:
Service:
Other:
Name: Michael Noell
Phone: 559-568-1576
Email: shreditmike@ocsnet.net
B1: Submit
Date: 01/23/2007
Time: 01:48 PM
Have 4-54 Detroits on several pieces of equipment and wells.
Generator:
Engine:
Parts:
Service:
Other:
Name: bill axelsen
Phone:
Email: bill.axelsen@questar.com
B1: Submit
Date: 05/26/2007
Time: 05:30 PM
I need the part between the clutch assembly and the engine. This part is marked with Rockford PTO part number 4-35771 assembley number 4-35771 serial number 873037 75-95 16 clutch. other numbers are 80240 and 80232. this unit is on a chevrolet 454 engine driving a natural gas compressor. please contact with information. thanks bill
Generator:
Engine:
Parts: ON
Service:
Other:
Name: Mr Michael Bellow
Phone: 502-371-5677
Email: michealbellow1@yahoo.com
B1: Submit
Date: 06/13/2007
Time: 09:49 AM
Dear Sales, Good morning,,i will like to know if you do have this item below in stock and also if you can be able to have it shipped to NEW YORK.., OEM GENUINE DETROIT 23522955 RING SET, PISTON-------60 QTYS If you do have this item mentioned above in stock for shipment,kindly do forward me the Total Quote price including the Shipping quote price via:---OVERNIGHT or 2 DAYS DELIVERY to this delivery address below pls: Ship To :-----Joseph Williams Quick Lagos 191 Schaefer Street Suite 2 Brooklyn NY 11207 U.S Also to let you know that the Payment Terms of this order will be by Credit Card:----MC,VC..let me know which you do accepted,as everything is ok with the bank for my credit cards to be approved to you when running it for this order at once. I will be glad if my order enquiry is accepted pls.Looking forward for your prompt response asap today. Sincerely Mr Michael Bellow 171 E. John Rowan Blvd Bardstown KY 40004, US 502-371-5677 E-mail:michealbellow1@yahoo.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Enrico Bariani
Phone: 916-689-9059
Email: bariani@aol.com
B1: Submit
Date: 06/15/2007
Time: 01:06 PM
To Whom It May Concern: I have bought a new generator set to provide power to our new facility in Yolo County, Ca.. Invoice# 71132, dated 9/27/05. We are now finilizing the electric system in the warehouse and it came to my attention that the 1200 ampere circuit breaker is not new, but used. Also, the box enclosing said breaker is not UL listed and won't pass the inspection by the County of Yolo. Since I paid for a new generator set, I am expecting to receive what I have paid for. Please take the necessary steps to solve the problems. Sincerely, Enrico Bariani Bariani Olive Oil, LLC Tel./Fax:916-689-9059 e-mail:bariani@aol.com
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Muhammad Naveed
Phone: 00923218221011
Email: ezpowerlinks@gmail.com
B1: Submit
Date: 06/19/2007
Time: 04:52 AM
Dear Sir, We are importer of used electric equipments here in Pakistan. We are importing used diesel gen set, electric motors, gears, switches etc- from Japan, Singapore, Korea and other countries of the world. We are also importing New generators sets from China and Japan. We looking to buy used generators of following ratings from USA 20KW to 100 KW Natural Gas 20KW to 100 KW Diesel 200KW to 400 KW Diesel If you have or arrange please send us pictures and details (Year of Mfg., used hours, alternator, ) along with your best ex works prices. Looking for you quick and favorable reply ASAP. Regards, Muhammad Naveed EZ Power Links Suite # 22, 2nd Floor, Lahore Centre, Main Boulevard, Gulberg III, Lahore Pakistan Tel: +92(42)5782971-2 Fax: +92(42)5782973 Email: ezpowerlinks@gmail.com Cell: +92-321-8221011
Generator:
Engine:
Parts: ON
Service:
Other:
Name: don peterson
Phone: 07024095747
Email: don_peterson_2000@hotmail.co.uk
B1: Submit
Date: 06/22/2007
Time: 06:11 AM
Hi Sales, I am don peterson ,an agent based in europe.i visited your website where i found products that are of immense quality which i will like to order on behalf of my customer that were located in the below mentioned countries. I will be very grateful if you reply to this email acknowledging me,so that i can send you the order of the products. I will also like to know if you do accept Master or Visa card for payment and if you can Ship to Lagos-Nigeria and Johannesburg-South-Africa. I will be very grateful if the above is considered and a favourable reply is sent to me. email: don_peterson_2000@hotmail.co.uk Below is my address; Dpeterson consultancy 85 mabley street, hackney, london, e9 5rj England. 07024095747 Regards, Don
Generator:
Engine:
Parts: ON
Service:
Other:
Name: richard quinonez
Phone: 760-796-5211
Email: rq3186@att.com
B1: Submit
Date: 06/22/2007
Time: 05:15 PM
I need a robertshaw mini tek liquid level sensor for a remote radiator. It is a screw in type with a ceramic/or plastic probe. It has a 4-pin female plug with a notch at 1 o'clock. part number is: 813-NLU-0000-T. I hope you can help. thanks.
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Edgar Suarez
Phone: 9544310202
Email: PMImiami@bellsouth.net
B1: Submit
Date: 06/25/2007
Time: 12:32 PM
Could you please quote a 30 KW, 3 phase, 60 HZ, Lister Petter engine, open unit, freight to Miami, FL. We are exporter of generators and parts to Latin America.
Generator:
Engine: ON
Parts:
Service:
Other:
Name: FATHI MOHAMMED
Phone: 00218913824302
Email: algtais_one@yahoo.com
B1: Submit
Date: 06/27/2007
Time: 08:14 AM
Pictures and prices marine engines power from 200 to 260 horsepower type Daewoo new or used, I need eight engines
Generator:
Engine: ON
Parts:
Service:
Other:
Name: al-fanar for trading & construction co.
Phone: 009673209197
Email: al-fanar@yemen.net.ye
B1: Submit
Date: 06/27/2007
Time: 11:49 AM
REF. NO.: (525) DEAR SIR , KINDLY REQUESTED TO OFFER US YOUR BEST BOSSIBLE PRICE FOR RENTING 20 MW DIESEL GENSET FOR A PERIOD OF ONE YEAR . PLS BE INFORMED THAT THE DIESEL WILL BE PAID BY THE RENTING . URGENTLY AWAITING YOUR RESPONSE BEST REGARDS, MOHAMMED ABBAS MANAGING DIRECTOR ALFANAR FOR TRADING & CONSTRUCTION CO. HODEIDAH - YEMEN P.O. BOX:4706 Tel: (00967) 3209197/3209198 Fax:(00967) 3209188
Generator:
Engine: ON
Parts:
Service:
Other:
Name: al-fanar for trading & construction co.
Phone: 009673209197
Email: ALFANAR@YEMEN.NET.YE
B1: Submit
Date: 06/27/2007
Time: 11:53 AM
REF. NO.: (525) DEAR SIR , KINDLY REQUESTED TO OFFER US YOUR BEST BOSSIBLE PRICE FOR RENTING 20 MW DIESEL GENSET FOR A PERIOD OF ONE YEAR . PLS BE INFORMED THAT THE DIESEL WILL BE PAID BY THE RENTING . URGENTLY AWAITING YOUR RESPONSE BEST REGARDS, MOHAMMED ABBAS MANAGING DIRECTOR ALFANAR FOR TRADING & CONSTRUCTION CO. HODEIDAH - YEMEN P.O. BOX:4706 Tel: (00967) 3209197/3209198 Fax:(00967) 3209188
Generator:
Engine:
Parts: ON
Service: ON
Other:
Name: Joseph Esling Marion
Phone: 509-441-0379
Email: eslingj@yahoo.fr
B1: Submit
Date: 06/28/2007
Time: 06:11 PM
How can I order some parts service( oil filters, fuel filters and air cleaners) including regulatory of the DC. alternator?
Generator:
Engine:
Parts: ON
Service:
Other:
Name: harjit singh
Phone: 01612496883
Email: indlkeys@yahoo.com
B1: Submit
Date: 07/01/2007
Time: 01:20 AM
We take pleasure in introducing ourselves as most competitive and professionally managed industrial keys provider. We are a sixteen years young company with young and committed personnel who can cater to all your quality products and spares requirements. We are a one stop solution to all your requirements. Our range of services includes: • Gib Head Key • Wood Ruff Key • Parallel Key • Cottor Pin Our clients include both large as well as small organizations. We cater to the needs of all our clients understanding their specific requirements and providing solutions accordingly. we thus request you to please go through our profile and advise where we could be of service to you? We have both the infrastructure and quality to handle your esteemed requirements. Please feel free to contact us at any time. We are eagerly waiting for a positive response from your end in order to provide our services. Thanking you in anticipation and Best regards, Harjit Singh Cell: 098152 86883 M/s Gahtore Sons Enterprises #1710/3, 7th Street, Simla Puri, Ludhiana - 141 003 Ph: +91-161-2496883 Fax: +91-161-5029210 E-mail: indlkeys@yahoo.com Website: www.indlkeys.com
Generator:
Engine:
Parts: ON
Service:
Other:
Name: Mark Davidson
Phone: 512-706-9489
Email: partsales@nopi.net
B1: Submit
Date: 07/05/2007
Time: 12:44 PM
Hello Sales, Good day, I will like to oder for this parts below,pls advise on price and availabilities. Genuine Perkin Power Part Perkins water pumps -- 145010870 100 Serie Perkins water pumps -- 145017730 100 Serie Perkins water pumps --685155C95 1300 Serie Perkins water pumps --U5MW0108 1000 Serie - 4 cyl Perkins water pumps --U5MW0108 1000 Serie - 4 cyl 26560143 -- SET------- FUEL FILTERS 26560145 -- SET------ FUEL FILTERS 26510354 ---------- AIR FILTERS 26510353 --------- AIR FILTERS K.R.P 1251 ----------- PISTON RINGS SET K.R.P 1151 ----------- PISTON RINGS SET K.R.P 3002 ----------- CON.ROD BEARINGS Waits to hear from you soonest. Regards, Mark.
Generator:
Engine:
Parts:
Service:
Other:
Name:
Phone:
Email:
B1: Submit
Date: 07/06/2007
Time: 05:31 PM
Try a phone number!!!!!
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Carlos Ortiz
Phone: 5122637948
Email: ortiz.cb@excava.com
B1: Submit
Date: 07/09/2007
Time: 11:20 AM
I need one Gen set 250 KVA diesel low hours open, skid mount with muffler and radiator.
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Carlos Ortiz
Phone: 5122637948
Email: ortiz.cb@excava.com
B1: Submit
Date: 07/09/2007
Time: 11:20 AM
I need one Gen set 250 KVA diesel low hours open, skid mount with muffler and radiator.
Generator:
Engine:
Parts:
Service:
Other: ON
Name: carlos ortiz
Phone: 5122637948
Email: ortiz.cb@excava.com
B1: Submit
Date: 07/09/2007
Time: 11:24 AM
? Can I have your phone number ?
Generator: ON
Engine:
Parts:
Service:
Other:
Name: ken keenan
Phone: 661-978-7260
Email:
B1: Submit
Date: 07/09/2007
Time: 01:14 PM
30 - 50 kva 480 volt 3 phase (diesel) generator
Generator:
Engine:
Parts:
Service:
Other:
Name: aliasghar tavakolifard
Phone: 00982144303354
Email: tavakolifard@usa.com
B1: Submit
Date: 07/10/2007
Time: 10:02 AM
Aliasghar Tavakolifard No , 17 lst Floor, Niloofar St Shahreziba , Shahran TEHRAN 14749 IRAN TEL : 0098 21 44303354 FAX: 0098 21 44333996 E-mail: tavakolifard@usa.com DD : 7 . 7 .2007 TO : MAHLE A ftermarket GmbH Dear sirs Please kindly send me A proforma Invoice for following Items C&F TEHRAN and Freight prepaid Air plane By IRAN Air . Contact me by Fax & E – mail . 1 – I.H.C DT 466 Clevite No GB - 1365p STD seat 10 2 - = = = Clevite No GB - 1365p 010 seat 10 3 - = = = Clevite No GB - 1365p 020 seat 10 4 - = = = Clevite No GB - 1365p 030 seat 10 ----------------------------------------------------------------------- 5 - I.H.C DT 466 Clevite No MS 1642p STD seat 10 6 - = = = Clevite No MS 1642p 010 seat 10 7 - = = = Clevite No MS 1642p 020 seat 10 8 - = = = Clevite No MS 1642p 030 seat 10 -------------------------------------------------------------------------- 9 - = = = Clevite No SH - 994S seat 50 --------------------------------------------------------------------------- 10 - I.H.C DT 817 Clevite No GB - 590p STD seat 20 11 - = = = Clevite No GB - 590p 010 seat 20 12 - = = = Clevite No GB - 590p 020 seat 20 -------------------------------------------------------------------------- 13 - = = = Clevite No MS – 529p STD seat 20 14 - = = = Clevite No MS – 529p 010 seat 20 15 - = = = Clevite No MS - 529p 020 seat 20 -------------------------------------------------------------------------- 16 - = = = Clevite No SH - 669S seat 50 --------------------------------------------------------------------------- Shipping Address Mr mahmud Mohammadi , No17 Niloofar st Shahran TEHRAN 14749 IRAN TEL 0098 21 44303354 FAX 0098 21 44333996 Thank you for your Business . We Look Forward To Enjoy Mutual Cooperation . Best Regards , Tavakoli
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Ray Augustyn
Phone: 860-672-6100
Email: ra@mohawkmtn.com
B1: Submit
Date: 07/11/2007
Time: 10:12 AM
We need a Rockford PTO with a 3-1 reducer that will fit a Ford 351 V8. Can you help?
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Pete Robles
Phone: 661-589-1042
Email: peterrobles@hondoinc.com
B1: Submit
Date: 07/11/2007
Time: 01:15 PM
I need information on your used generators. Thanks
Generator:
Engine:
Parts: ON
Service:
Other:
Name: DAVID ZERMENO
Phone: 011528183202944
Email: zerma29@hotmail.com
B1: Submit
Date: 07/13/2007
Time: 11:40 AM
PARTS DEPARTMENT, PLEASE I NEED PRICE AND DELIVERY TIME OF THE FOLLOWING PARTS, FOR FUNK TRANSMISSION MOD. 1013E131B SERIE: 960225129. 1 40A1982 SHAFT 1 40A1115 GEAR 1 YZ4101261 GEAR 1 400184 RETAINER 1 YZ15239K SEAL KIT PLEASE LET´ME KNOW AS SOON YOU CAN THANKS DAVID ZERMEÑO
Generator: ON
Engine:
Parts:
Service:
Other:
Name: tahir mehmood
Phone: 773-216-6430
Email: mehmoodchicago@yahoo.com
B1: Submit
Date: 07/15/2007
Time: 07:19 AM
i am intrested in buying diesel generators used and prices of 150kw to 1000kw cat and commins
Generator: ON
Engine:
Parts:
Service:
Other:
Name: jerry
Phone: 86-591-87679483
Email: sales@huacen.cn
B1: Submit
Date: 07/15/2007
Time: 09:10 PM
Dear Sir or Madam, I get the information from the internet that you may want generators,so let me introduce our company first. Our company ,Fuzhou Huacen Power Equipment Co.,Ltd. is engaged in manufacturing and selling gasoline generators, diesel generators and water pumps with high quality and reasonable prices . Our company put through EPA,CE,GS,and ISO9001 certificate. If you show any interest in our products, please do not hesitate to contact with me. Thanks. And allow me to introduce parts of our products as followings: 1.Gasoline Generators: with EPA Model Rated power (kw) Price ( FOB China ) EP 1500CX 1.0 USD 105.00 EP 3000CX 2.5 USD 135.00 EP 3500CX 3.0 USD 160.00 EP 5500CX 4.0 USD 260.00 EP 6500CX 5.0 USD 275.00 EP 8500CX 6.0 USD 290.00 You will see more details in the Attachment ONE including pictures. 2.Diesel Generators: Model Rated power (kw) starting system Price (FOB China) HDGY 3000CXE 2.0 electric starter USD 320.00 HDGY 5500CXE 3.5 electric starter USD 380.00 HDGY 7500CXE 5.0 electric starter USD 425.00 HDGY 5500SE 4.0 electric starter (silent type) USD 500.00 HDGY 7500SE 5.0 electric starter (silent type) USD 540.00 And if you need EPA Certificate for diesel generators ,USD 40 should be paid additionally. You will see more details in the Attachment TWO including pictures. 3.Gensets：silent type diesel generator (FOB China) HDF-20KW USD2500.00 HDF-30KW USD3400.00 HDF-40KW USD4000.00 HDF-50KW USD4500.00 HDF-100KW USD8500.00 HDF-150KW USD13000.00 HDF-200KW USD16000.00 If you need EPA ,you should pay more dollars. You will see more technical data in the Gensets Attachment. If there is any question, please contact me. Regards. yours sincerely Jerry
Generator: ON
Engine:
Parts:
Service:
Other:
Name: thomas guindon
Phone: 0000000000
Email: tguindon@gmail.com
B1: Submit
Date: 07/16/2007
Time: 10:52 PM
I'm Thomas Guindon and i'm interested in purchasing some gasoline or diesel powered generators that generate powerbetween 10000 and 13000 watts.Please write back asap and let me know if you carry any. Regards Thomas
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Christopher Cook
Phone: 760-885-0516
Email: crshtest111606@aol.com
B1: Submit
Date: 07/18/2007
Time: 12:13 PM
I am interested in a diesel mechanic position, if you are hiring. I am relocating to Central California.
Generator: ON
Engine:
Parts:
Service: ON
Other:
Name: Tim Land
Phone: 209-723-1015
Email: tim@celebrationradio.com
B1: Submit
Date: 07/20/2007
Time: 03:32 PM
Need info TODAY about servicing our Elliott 40 K Generator, with an Isuzu diesel engine.
Generator:
Engine:
Parts:
Service: ON
Other:
Name: California Medical Facility
Phone: 7074496552
Email: Jon.Zeh@cdcr.ca.gov
B1: Submit
Date: 07/20/2007
Time: 05:15 PM
Is your company interested on bidding a 1.9 million dollar co-generation maintenance contract? I will be out of the office the week of July 23rd. I can be reached at (707) 449-6552 Jon Zeh, Chief Engineer
Generator:
Engine:
Parts:
Service: ON
Other:
Name: California Medical Facility
Phone: 7074496552
Email: Jon.Zeh@cdcr.ca.gov
B1: Submit
Date: 07/20/2007
Time: 05:15 PM
Is your company interested on bidding a 1.9 million dollar co-generation maintenance contract? I will be out of the office the week of July 23rd. I can be reached at (707) 449-6552 Jon Zeh, Chief Engineer
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Bill Marsh
Phone: 540-552-4519
Email: redcloud54@verizon.net
B1: Submit
Date: 07/24/2007
Time: 09:29 PM
Do you buy used generators? I have the following Cummins unit: Genset-SpkIgn,60Hz,35kW-Standby Duty Rating-Standby Power Fuel System-Natural Gas Voltage-120/240,1Phase,3 Wire Alt-60Hz,12L,BR,F1PO,105C Set Cntl-Detctr12,AC Mtrs Exciter/Reg-Torque Match EngGov-Electr,Isoch Only CB Mtg-1Brkr,LeftOfGenEnd CB-150A,2P,240VAC,80%,UL Skidbase-Housing Ready Eng Cooling-Radiator,40C Shutdown-Low Coolant Lvl Coolant Htr-120V,1Ph Exh Connector-NPT Genset Warranty-1 Yr Base Packing-Skid,Poly Bag Rack-Battery Extension-Oil Drain
Generator:
Engine:
Parts:
Service:
Other: ON
Name: Erin Wagoner
Phone: 800-264-6777
Email: ewagoner@npps1.com
B1: Submit
Date: 07/25/2007
Time: 09:21 AM
Can you use a Diesel Mechanic RIGHT NOW? Highlights of this Candidate: • 25 years of experience in the Diesel Industry • Wide range of experience including Power Generation, Mining Equipment, Heavy Construction machinery, Marine and Fleets. • 71, 92, 53, 8.2, Series 4000 Engines Training • Extensive knowledge in MULTI-ECM Engine use • Series 60 Engine training school T3 Techfinders is a recruiting firm that specializes in the Transportation Industry. We locate qualified Candidates for Companies just like yours when they have a position they need help filling. We also assist well qualified Candidates open doors to opportunities they most likely would not find on their own. Through our efforts, people are brought together when they would not have been otherwise. For this service, we charge a placement fee, payable by the Employer. T3 Techfinders has established that the following fee schedule is extremely equitable for the skills that our Candidates possess. For lesser qualified Candidates, the fee is negotiable on a Case Sensitive basis. Hourly compensated positions: 1. $5,000 one time fee, paid when the mechanic starts at your company. OR 2. $2,250 per month, paid for three months. OR 3. $1,416 per month, paid for six months. Salary compensated positions: 20% of the agreed upon first year base salary. In order to discuss the opportunity of working together, please contact me at (314) 787-6226 or toll free at (800) 264-6777. Sincerely, Erin Wagoner Consultant-T3 Techfinders
Generator:
Engine: ON
Parts:
Service:
Other:
Name: Jack Xu
Phone: 0086-023-68831965
Email: cqxl1@163.com
B1: Submit
Date: 07/27/2007
Time: 01:47 AM
We are Hongmei generator manufacture CO.,LTD.in China.We supply Gasoline-powered Generators,Gasoline-powered pumps,gasoline engine with good quality and low price.please contact us to know details. company name:Chongqing hongmei generator manufacture CO.LTD. address:Huzhu industrial park,Dadukou district ,Chongqing city ,China postcode:400084 telephone number:0086-023-68831965 0086-023-68935078 fax number:0086-023-68952793 Email:cqxl1@163.com cqxl2@163.com http://cqxuliang.cn.alibaba.com Jack Xu Awaiting for your immediate response.Thanks and best regards
Generator: ON
Engine:
Parts:
Service:
Other:
Name: LLOYD KALININ
Phone: 62274787537
Email: jagofurniture@yahoo.com
B1: Submit
Date: 07/28/2007
Time: 04:08 AM
we manufacture in jogjakarta indonesia we urgently need more power,also very interested in alternative fuel. please price ,top condition ,350 to 500 kva diesel ,complete ,prime power ,silenced, for 8 hour shifts,50hz,240v,we calculate our future needs to be around 1000kw operating now 125kva plus mains power.we plan groups of machines on designated generators ,is this best or should use one for the whole plant
Generator:
Engine:
Parts: ON
Service:
Other:
Name: salvador salazar willis
Phone: 662-2120126
Email: salazar_salvador@hotmail.com
B1: Submit
Date: 07/30/2007
Time: 07:43 PM
i wuold like to buy parts here , i resale parts on mexico i have my own businnes . please contact me . i need price for overhaul kit navistar 7.3l main bearing size 0.10 rod beraings 0.20 piston kit (rings) 0.30 full gasket set cam and rod bushings and oil pump piston pin 1.308 factory turbo
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Andy Herrera
Phone: 01152-477-2563763
Email: rlettuce@hotmail.com
B1: Submit
Date: 07/31/2007
Time: 09:59 AM
Iam looking for a generator to supply power to a vacume tube for cooling produce.i need two generators Iam located in leon gto. mexico if you can reply asap would help out thanks Andy Herrera
Generator:
Engine:
Parts:
Service:
Other:
Name: Anna
Phone: 086-0594-3605653
Email: anna1_chinalutong@hotmail.com
B1: Submit
Date: 07/31/2007
Time: 08:54 PM
Dear Manager, Have a nice day! I'm pleased to introduce myself,my name is Anna,i'm the sales manager assistant of China-Lutong Parts Plant.Our company is specialists for diesel injection spare parts,with our headquarters located in Fujian,near xiamen Airport,china. We are specialized in the export of our own china-lutong products,all kinds of precision parts for replacement of zexel,bosch,denso and so on,such as injection nozzles,pump elements,delivery valves,feed pumps,Head Rotor,to all oversea markets. Anna We are ADS member as Replacement Part Manufacturer &Distributor.Our code is #123786.For more ditails you can landing www.china-lutong.com .. We will offer you high quality products,competitive price and best service! Hope we can have a favorable cooperation! Your prompt reply will be kindly appreacited. Best regards! Anna (Sales Manager Assistant) TEL:0086-594-3605653 FAX:0086-594-3605652 ADD:67#,industrial road, Putian,Fujian province CHINA.(351100) http://www.china-lutong.com E-mail: Anna@chinalutong.net MSN: Anna_chinalutong@hotmail.com
Generator:
Engine:
Parts: ON
Service:
Other:
Name: Shakib Misherghi
Phone: 218913771041
Email: shakibm@amjad-africa.com
B1: Submit
Date: 08/01/2007
Time: 04:00 AM
We need new MTU Diesel Engine parts. The list if very extensive. I don't know if I can list them in this tiny window: AMJAD Africa Inc. NOTE: Manual: MTU workshop manual,M020103/02E FOR diesel engine 16v 2000 g 23-38 item section page no 7 3.1.6 81 8 3.1.6 81 14 3.1.8 97 49,50,51,52,53, 3.3.43 308 64,65,66 3.5.8 376 ENQUIRY REF: RFQ 046736 DATED: 30 JULY 2007 ITEM QTY DESCRIPTION UNIT TOTAL MTU Diesel Engines for CPF Power Supply Type 16V2000G82 Model MT925A Crankcase Disassembly Special Tools 1 1 Extraction Tool Part NoL: F6559618 2 1 Rotation Device Assembly Part No: F6554681 3 4 Support Part No: F6554682 4 2 Distance Plate Part No: F6554683 5 2 Support Part No: F6554684 6 2 Support Part No: F6554685 3.1.6 Crankcase Check 7 1 Bore Gauge (See note above) Part No: Y20091481 8 1 Bore Gauge (See note above) Part No: Y20091482 2 3.1.8. Crankcase Assembly 9 1 Guide Tube Stage 0-0 Part No: F6555713 10 1 Guide Tube Stage 1-0 Part No: F6557976 11 1 Stop Pin 30 Part No: F6555713 12 1 Stop Pin 30.25 Part No: F6557924 13 1 Stop Pin 30.5 Part No: F6557925 14 1 Shrinking Tool (See note above) Part No: F689377289 3.1.15 Cylinder Installation 15 1 Safeguard Rail Part No: F6555715 16 1 Measurement Plate Part No: S41589002/00 17 1 Install & Removal Tool Part No: S4115890133/00 3.1.17 Oil Pan-Removal 18 4 Lowering Device Part No: F6789489 Flywheel Housing Disassembly 3.2.4. 19 1 Extractor Crankshaft BRG Part No: F6781536 Flywheel Housing-Ass. 3.2.8. 20 1 Guide Bushing Part No: F6555761 21 1 Shrinkage Tool Part No: F30398021 Flywheel Hous Installation 3.2.9. 22 1 Locating Pin Part No: F0140519 23 1 Guide Ring Part No: F6559615 3 24 1 Guide Bushing Part No: F6557981 25 1 Guide Bushing Part No: F6780595 3.2.11 Gearcase Free-end Remove 26 4 Guide Pin Part No: F6558527 27 1 Axial Fication Camshaft Part No: F6557258 3.2.12 Gearcase Free End Dis'y 28 1 Extraction Tool for Shaft Seal Part No: F30379303 3.2.16 Gearcase Free End Assy. 29 1 Shaft Seal Drift Part No: F30378879 3.2.17 Gearcase Free End Install 30 1 Alignment Tool Part No: F6554690 31 1 Press-in Device Shaft Seal Part No: F6557984 32 1 Press-in Device Shaft Seal Part No: F6780507 3.2.18 G'Case Main BRG, Free End R & Installation 33 1 Insersion Tool Part No: F30379217 3.3.3 Crankshaft Removal 34 1 Percussion Puller Part No: F6557901 35 4 Guide Pin Part No: F6555644 3.3.8 Crankshaft Assembly 36 1 Alignment Device for Drive end c/s Gear Part No: F6552506 37 1 Clearance Gauge Drive end c/s Gear Part No: Y4341111 4 38 2 Assembly 316 Free End c/s Gear Part No: F6554711 39 1 Clearance Gauge Free End c/s Gear Part No: Y4341107 40 1 Clearance Gauge Part No: Y20020128 3.3.18 PTO Flange Drive End, Flywheel Ass. 41 1 Shaft Seal Installation Tool Part No: F6550770 3.3.26 Vibration Camper 42 1 Puller Part No: F30379133 43 1 Assembly Jig Part No: F6554708 3.3.28 Drive Flange on PTO Free End Removal 44 1 Assembly Installation/Remove Device Part No: F0099996 45 1 Protective Sleeve Part No: F6558561 46 1 Support Bracket Part No: T80091333 3.3.35 Piston & ConRod Removal 47 1 Puller Part No: F6782138 ` 3.3.38 Piston Check 48 1 Ring Gauge Part No: Y4340797 3.3.43 ConRod - Repair 49 1 Press-In Device (See note above) Part No: F6781639 50 1 Retainer Small Boss (See note above) Part No: F6347932 51 1 F.T. Small Boss (See note above) Part No: F6376294 52 1 Retainer Large Boss (See note above) Part No: F6554737 5 53 1 Shrinking Tool (See note above) Part No: F30377859 3.3.44 ConRod Assembly 54 1 Assembly Jig Part No: F6557995 3.3.46 Piston Assembly 55 1 Piston Ring Pliers Part No: F30378001 3.3.47 Piston & ConRod Installation 56 1 Assembly Sleeve Part No: F6557147 57 1 Piston Ring Compressor Part No: F6554678 58 1 Bridge Meter Part No: S415890121/00 59 1 Dial Gauge Part No: 0015895321/00 3.5.3 Camshaft Removal 60 1 Installation/Removal Device Part No: F6554679 61 1 Locating Pin for Camshaft Part No: F6557148 3.4.8 Camshaft Timing Check 62 1 Pointer for 12-18V Part No: F6554696 63 1 Graduated Disc 16V Part No: Y343816 64 1 Dial Gauge (See note above) Part No: 001589532/00 65 1 Measuring Device (See note above) Part No: Y4341106 66 1 Measuring Stand (See note above) Part No: 001589032/00 3.4.14 Roller Tappet, Pushrod - Installation 67 1 Pliers Part No: F30378037 6 3.16.7 Mechanical Fan Drive Assembly 68 1 Installation Tool for Radio Seal (No part number found) Total Packing and Delivery Documentation Estimated Sea Freight TOTAL C&F TRIPOLI PORT Validity : 90 days Present Delivery: 6/8 weeks with the exception of Part No: F6554681 - 7/8 months and Part No: T80091333 - 18/20 weeks.
Generator: ON
Engine:
Parts:
Service:
Other:
Name: Paul Bonfy
Phone: 580-761-2643
Email: psbnok@hotmail.com
B1: Submit
Date: 08/01/2007
Time: 09:43 AM
Need a brushless generator head to fit a 1968 Cummins 310 hp diesel. It has a 175 kw on it now. What will fit on this gen set? Would a 200 or 225 wor if only loaded to the engines rating. Paul Bonfy
Generator: ON
Engine:
Parts:
Service:
Other:
Name: clement
Phone: 9738012911
Email: meme@doctor.com
B1: Submit
Date: 10/10/2007
Time: 10:45 AM
usedgenerator40kwkohlerh