|
A SAFER ALTERNATIVE TO ETHYLENE GLYCOL
Click Here for Online Ordering

EXTENDED LIFE - SCA PRE-CHARGED FORMULA

Sta-Clean Products, Inc. has manufactured
quality inhibitor products for the industrial world market for over 45
years. Sta-Clean Antifreeze is the product of this expertise, combining
Sta-Clean's custom formulated inhibitor package with Propylene Glycol,
resulting in one of the most superior and sophisticated antifreezes
available. Sta-Clean Antifreeze has a proven track record of superior
performance in the US fleet market for over 10 years.

|
|
- EXCELLENT ALUMINUM PROTECTION
|
|
|
- SUPERIOR LINER PITTING, CORROSION
|
|
|
- AND ELECTROLYSIS PROTECTION
|
|
|
- SAFER TO HANDLE AND STORE
|

Fleets maintaining Sta-Clean Antifreeze
with Sta-Clean BNT as directed, have documented over 800,000 miles of
use without draining. Thus reducing the number of antifreeze changes
drastically, if not entirely, saving labor, recycling and antifreeze
costs. RUNNING STA-CLEAN ANTIFREEZE AS DIRECTED FOR EXTENDED PERIODS
PROVIDES AN ALTERNATIVE TO RECYCLING AND ITS INHERENT PROBLEMS. Sta-Clean
Antifreeze is completely recyclable.

Sta-Clean Antifreeze has a special
formula that creates a mechanical and electrochemical barrier which
retards heavy metal leaching into the coolant. Lab analysis of the heavy
metal content after over 600,000 miles of use (maintained as directed)
were under allowable limits for most sewer disposal: Iron<0.2 PPM,
Copper<0.2 PPM, Aluminum<1 PPM, Lead<5 PPM, Zinc<0.2 PPM, and Tin<5 PPM.
Check with local authorities for disposal regulations.

A Detroit Diesel 8V92T engine was run on
a dynamometer for one hour at full horsepower (432hp) with 8% Sta-Clean
Antifreeze poured directly in the crankcase. (1/2 to 1% of Ethylene
Glycol in the oil causes rapid bearing failure resulting in the shutdown
of the engine.) Wear on the
bearings was absolutely normal when the engine was torn down!
(Video is available.)

Check
Sta-Clean BNT's efficiency
level at regular maintenance intervals, using BNT Test Strips. Use of
test strips as directed on the package maintains approximately 1500 PPM
of Nitrite. This regulates the corrosion protection and extends the life
of Sta-Clean Antifreeze for longer periods. Maintained as directed, test
fleets have experienced over 800,000 miles without draining.

Do not use EG hydrometer concentration
testers. Freeze test strips are available wherever Sta-Clean is
purchased. PG/EG Refractometers are also available.


-
For best results, drain and flush the
present antifreeze mixture. Clean the system with Sta-Clean RC to
begin the coolant treatment program with the cleanest radiator
possible.
-
Add the appropriate amount of Sta-Clean
Antifreeze with water according to the freeze protection chart for
the freeze level desired.
Click here for
online ordering or
email ccp@gensets.com for more
information or bulk pricing
**Please note all
international inquiries should email or call before ordering**
|